How to Connect two PC or Computer using LAN cable Step by Step - FindersAdda : Tutorials of Make Money, Computer or Internet

Friday, 22 September 2017

How to Connect two PC or Computer using LAN cable Step by Step


Hello Friends! How are You? I hope, you will be good. Today, I am present once again with a new post. 

In this article, I am going to share what is LAN and how to connect two PC or computer using LAN cable and transfer the data from one computer to another computer.

What is LAN?


LAN stands for Local Area Network that connect group of computers in small area like an office building, school and home etc. Local area network is generally used to sharing of resources like printers, scanners, internet, files and also connect transfer files from one computer to another computer.


How to connect two PC or computer using LAN cable.



How to connect two PC or computer using LAN cable and transfer the files?



If you want to know that how to connect two PC or computer using LAN cable then you have come to the right place. Here, you will find correct information step by step. I hope that you will not have any problem to connect to PC or computer using LAN cable.

1) First of all, check your cable that It is LAN cable or not. If it is LAN cable then attach this cable in PC at the right place.


LAN cable


2) After attaching cable, make sure that whether your PC or computer has a password or not. If you don't know how to set password in computer then read this post before because you have to need password when sharing files to another computer using LAN cable.

3) Then open control panel and click on the Network and Sharing Center.


Network and sharing center


4) Then click on the Change Advanced Sharing Setting and then turn on all option and then click on the Save Changes.


Change advanced sharing center


5) After that click on the Change Adapter Setting which is reside left side in network and sharing center tab.


Change Adapter Setting


6) Now, Right click on the Ethernet and then click on the Properties option.


Click on the properties


7) Then double click on the Internet protocol version 4 (TCP/IPV4)


Double click on the IPV4


8) Then select Use the following IP address and write 192.168.1.1 in front of IP address and then click on the below box in front of Subnet mask and then again write 192.168.1.1 in Default gateway box and then click on the OK button and again click on the OK button.


Set IP address in first computer


9) Then go to second PC or computer and open Control Panel >> Network and Sharing Center and then click on the Local Area Connection.


Click on the Local area connection


10) Now, a pop-up box will be opened. In this pop-up box, Click on the Properties button.


Click on the properties


10.0) Then again a pop-up box will be opened. In this pop-up box, double click on the Internet Protocol version 4(TCP/IPV4) 

11) Then select Use the following IP address and write 192.168.1.2 in front of IP address and then click on the below box in front of Subnet mask and then again write 192.168.1.1 in Default gateway box and then click on the OK button and again click on the OK button.


Set ip in second computer


12) Then click on the Change Advanced Sharing Setting and then turn on all option and then click on the Save Changes.


Change advance sharing setting


13. Then go to first computer and open My computer or This PC and right click on the any drive which you want to share in another computer. and then click on the Properties option.

14) Select sharing tab and then click on the Advanced Sharing.. option.


Sharing tab


15) Then tick the Share this folder option and click on the permission option.


Tick the Share this folder


16) Then a pop-up box will be opened. In this pop-up box, Tick or allow the full Control option below Allow option and then click on the Ok and then again click on the Ok and then click on the Close.


Tick the all allow option


17) Then go to second computer and click on the Network option .


Double click on the Desktop in Network


18) Now, Two computers are showing in Network field. Click on the Desktop-50452 computer And enter username and password of first computer. Here, username of first computer is your computer name. You can see your username in control panel.

19) After entering username and password, click on the Ok button and then you can access first computer data in second computer.


Enter first computer username and password

Final Words

In this article, I told that how to connect two PC or computer using LAN cable to share resources and data. I hope you liked this post so much. If you loved this post, Then, share with your friends and also give some suggestion that what should i improve in this post. Thank You So Much......

About Author

SUMIT KUMAR GUPTA
SUMIT KUMAR GUPTA

Author & Editor

Myself Sumit Kumar Gupta & 21 year's old person. I am a programmer and blogger. I spend much more time on programming and blogging and helps other programmers and bloggers.

0 comments:

Post a Comment

We are eager to see your comments.
Comment Rule :

1. Don't use any link in the comment box. If you have any problem related to link then contact me with the contact form.

2. Don't use the wrong word if you write the wrong word in comment box then it will get spam.